CyberData 011085 Especificaciones descargar pdf (Pagina 16)

Installing the VoIP V2 Paging Amplifier

Paging Amplifier Setup

Operations Guide 930363G CyberData Corporation

High Power Mode

Figure 2-5. Using the Amplified Outputs—High Power Mode

Cat 5 Ethernet Cable

802.3at PoE Injector (high power mode)

2 speakers in parallel (4 Ohm total)

Note: Use wire nuts to connect wire

from the speakers to 16 gauge wire.

Note: You can use an 802.3at

compliance switch instead of an

802.3at power injector and hub.

Twist wire nuts

Optional 2 Speaker Configuration

(802.3at mode)

8 Ohms

Standard 1 Speaker Configuration

(802.3af mode)

8 Ohms

16 gauge wire

25 feet maximum distance

Use 16 gauge wire coming out of screw terminals.

Note: Make sure that the wire length going to the

wire nuts is kept short (approximately 6 inches).

*Note

: The positive (+) wire coming from the speaker

may be red or white. The negative (-) wire is black.

Non-PoE Ethernet Switch

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 44 45

Sin comentarios

CyberData 011085 Especificaciones Pagina 16