CyberData 011209 Especificaciones descargar pdf (Pagina 44)

Installing the VoIP V3 Emergency Intercom

Configure the Nightringer Parameters

Operations Guide 930504F CyberData Corporation

2. On the Nightringer Configuration page, enter values for the parameters indicated

in Ta ble 2-13.

Web Page Item Description

Enable Nightringer When the nightringer is enabled, the unit will attempt to

made to this extension will play a ringtone.

Nightringer Settings

SIP Server Type the SIP server represented as either a numeric IP

address in dotted decimal notation.

Remote SIP Port Type the Remote SIP Port number (default 5060)

(8 character limit).

Local SIP Port Type the Local SIP Port number (default 5060)

(8 character limit).

Note: This v

alue cannot be the same as the Local SIP Port*

found on the SIP Configuration Page.

User ID Type t he U

ser ID (up to 64 alphanumeric characters).

Authenticate ID Type the A

uthenticate ID (up to 64 alphanumeric

characters).

Authenticate Password Type t he A

uthenticate Password (up to 64 alphanumeric

characters).

Re-registration Inter

val (in seconds) Type the SIP Registration lease time in minutes (default is

60 minutes) (8 character limit). Re-registration Interval (in

seconds)*

Click the Sa

ve button to save your configuration settings.

Note: Y

ou need to reboot for changes to take effect.

Click on the Re

boot button to reboot the system.

3. After changing the parameters, click on the Save button.

Table 2-13. Nightringer Configuration Parameters

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 85 86

Sin comentarios

CyberData 011209 Especificaciones Pagina 44