CyberData RAL 9003 Especificaciones descargar pdf (Pagina 26)

Installing the Singlewire-enabled Speaker

Configure the Speaker Parameters

Operations Guide 930320C CyberData Corporation

2.4 Upgrade the Firmware and Reboot the Singlewire-

enabled Speaker

To upload the Singlewire-enabled Speaker firmware from your PC:

1. Set up a TFTP server.

If you do not already have a TFTP server running on your network, see Appendix B, "Setting up

a TFTP Server".

2. Retrieve the latest Singlewire-enabled Speaker firmware from the Singlewire-enabled Speaker

Downloads page at:

http://www.cyberdata.net/products/voip/digitalanalog/singlewirespeaker/downloads.html

3. Unzip the Singlewire-enabled Speaker version file. This file may contain the following:

•Firmware file

• Release notes

4. Copy the firmware files to be upgraded to the appropriate TFTP server directory:

• c:\tftp-root\for Windows

• /tftpboot/for Linux

5. Log in to the Singlewire-enabled Speaker home page as instructed in Section 2.3.1, "Log in to the

Configuration Home Page".

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 44 45

Sin comentarios

CyberData RAL 9003 Especificaciones Pagina 26