CyberData VoIP Paging Gateway Manual de usuario descargar pdf (Pagina 3)

For Windows Server 2008/Windows Vista:

1. Select Start > Control Panel.

2. If you have Classic View, select Network and Sharing Center and then Manage Network

Connections. If you have Category View, select Network and Internet, View network status

and tasks, and then Manage Network Connections.

3. Double-click the active LAN or Internet connection.

4. Select Properties.

5. In the Networking tab, highlight the Internet Protocol (TCP/IP) item, and select Properties.

6. In the General tab, select Use the following IP address, and enter:

IP Address 192.168.3.1

Subnet Mask 255.255.255.0

Default Gateway 192.168.3.10

7. Select OK.

CyberData VoIP Paging Server Network Settings

The CyberData VoIP paging server is configured with a static IP address on factory default. This must be

changed so that the device is connected to your network.

To enter network settings for the CyberData VoIP paging server:

1. Open your browser and enter the IP address of the paging server. The factory default is

192.168.3.10.

2. When prompted, use the following default Web Access user name and password:

Web Access User Name: admin

Web Access Password: admin

3. Select Network Setup.

4. Under IP Addressing, select DHCP.

5. Select Save Settings.

NOTE: To configure the CyberData VoIP ceiling speakers, refer to Configuring CyberData VoIP

Ceiling Speakers technical note, available online at http://kb.adtran.com/.

1 2 3 4 5 6 7 8 ... 11 12

Sin comentarios

CyberData VoIP Paging Gateway Manual de usuario Pagina 3