CyberData 011123x Especificaciones descargar pdf (Pagina 21)

Operations Guide 930370M CyberData Corporation

Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)

Parts List

2.2.4 Call Button and Indicator Light

2.2.4.1 Indicator Light Function

• Upon initial power or reset, the indicator light will illuminate.

• When the software has finished initialization, the indicator light will blink twice.

• When a call is established (not just ringing), the indicator light will blink.

• On the Device Configuration Page, there is an option called Button Lit When Idle. This option

sets the normal state for the indicator light. The indicator light will still blink during initialization

and calls.

• The indicator light flashes briefly at the beginning of RTFM mode.

Figure 2-6. Call Button and Indicator Light

2.2.4.2 Dialing from the Keypad

• See the Enable Telephone Operation setting in Section 2.3.6, "Configure the Button

Parameters".

Call button and indicator light

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 85 86

Sin comentarios

CyberData 011123x Especificaciones Pagina 21