CyberData 011123x Especificaciones descargar pdf (Pagina 36)

Operations Guide 930370M CyberData Corporation

Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)

Parts List

2. On the SIP Configuration page, enter values for the parameters indicated in Ta bl e 2-10.

Table 2-10. SIP Configuration Parameters

Web Page Item Description

Enable SIP Operation Enables or disables SIP operation.

SIP Settings

SIP Server Use this field to set the address (in dotted decimal notation

or as a canonical name) of the SIP registrar. This field can

accept canonical names of up to 255 characters in length.

Backup SIP Server 1

Backup SIP Server 2

When the primary SIP Server goes offline and the device

fails to register after the normal re-registration interval, the

controller will fall back to using Backup SIP Server 1.

If Backup SIP Server 1 fails, the device will use Backup SIP

Server 2.

If a higher priority SIP Server comes back online, the

device will switch back to this server.

You can leave the Backup SIP Server 1 and Backup SIP

Server 2 fields blank.

Remote SIP Port* Type the Remote SIP Port number (default 5060) 

(8 character limit).

Local SIP Port* Type the Local SIP Port number (default 5060) 

(8 character limit).

Outbound Proxy Type the Outbound Proxy as either a numeric IP address in

dotted decimal notation or the fully qualified host name 

(255 character limit [FQDN]).

Outbound Proxy Port Type the Outbound Proxy Port number (8 character limit).

SIP User ID* Type the SIP User ID (up to 64 alphanumeric characters).

Authenticate ID* Type the Authenticate ID 

(up to 64 alphanumeric characters).

Authenticate Password* Type the Authenticate Password (up to 64 alphanumeric

characters).

For information about Point-to-Point Configuration, see

Section 2.3.5.1, "Point-to-Point Configuration".

Re-registration Interval (in seconds)* Type the SIP Registration lease time in minutes (default is

60 minutes) (8 character limit). Re-registration Interval (in

seconds)*

Unregister on Reboot* When selected, on boot, the device will first register with a

SIP server with a expiration delay of 0 seconds. This has

the effect of unregistering any current devices on this

extension.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 85 86

Comentarios a estos manuales

Sin comentarios

CyberData 011123x Especificaciones Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta CyberData 011123x