CyberData 011214 Especificaciones Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 97
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
Installing the VoIP V3 Outdoor Intercom with Keypad
Intercom Setup
Operations Guide 930522C CyberData Corporation
20
2.3.5.2 Restoring the Factory Default Settings
When troubleshooting configuration problems, it is sometimes convenient to restore the device to a
known state.
Note Each Intercom is delivered with factory set default values.
To restore the factory default settings:
1. Press and hold the RTFM button (SW1) for more than five seconds.
2. The device announces that it is restoring the factory default settings.
Note The device will use DHCP to obtain the new IP address (DHCP-assigned address or default
to 10.10.10.10 if a DHCP server is not present).
Figure 2-10. RTFM Button
2.3.6 Adjust the Volume
You can adjust the volume through the Device Configuration Page.
SW1
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 96 97

Comentarios a estos manuales

Sin comentarios