CyberData 011214 Especificaciones Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 97
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
Installing the VoIP V3 Outdoor Intercom with Keypad
Intercom Setup
Operations Guide 930522C CyberData Corporation
34
2.4.6.1 Point-to-Point Configuration
When the board is set to not register with a SIP server, it's possible to set the device to dial out to a
single endpoint. To do this, do the following:
1. On the SIP Configuration page (Figure 2-15), make sure that the Register with a SIP Server
parameter is not selected.
Figure 2-15. SIP Configuration Page Set to Point-to-Point Mode
Intercom is set to NOT register with a SiP server
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 96 97

Comentarios a estos manuales

Sin comentarios