CyberData 011305 Especificaciones Pagina 45
- Pagina / 87
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Operations Guide 930943A CyberData Corporation
38
Installing the VoIP Indoor Intercom
Configure the Sensor Configuration Parameters
2. On the Sensor Configuration page, enter values for the parameters indicated in Ta bl e 2-13.
Note You must click on the Save button and then the Reboot button for the changes to take
effect.
Table 2-13. Sensor Configuration Parameters
Web Page Item Description
Door Sensor Settings
Door Sensor Normally Closed Select the inactive state of the door sensors.
Door Open Timeout (in seconds) Select the number of seconds that you want to pass before the
door sensor is activated.
Flash Button LED Check this box to flash the LED until the sensor is deactivated
(roughly 10 times/second).
Activate Relay Check this box to activate the relay until the sensor is deactivated.
Play Audio Locally Check this box to loop an audio file out of the Intercom speaker
until the sensor is deactivated.
Make call to extension Check this box to call a preset extension (once).
Play recorded audio Check this box to play a pre-recorded audio file (once).
Dial Out Extension Enter the desired dial-out extension number.
Dial Out ID Type the desired Extension ID (64 character limit).
Use this button to test the door sensor.
Intrusion Sensor Settings
Flash Button LED Check this box to flash the LED until the sensor is deactivated
(roughly 10 times/second).
Activate Relay Check this box to activate the relay until the sensor is deactivated.
Play Audio Locally Check this box to loop an audio file out of the Intercom speaker
until the sensor is deactivated.
Make call to extension Check this box to call a preset extension (once).
Play recorded audio Check this box to play a pre-recorded audio file (once).
Dial Out Extension Enter the desired dial-out extension number.
Dial Out ID Type the desired Extension ID (64 character limit).
Use this button to test the Intrusion sensor.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
- Singlewire-enabled 1
- VoIP Indoor Intercom 1
- Operations Guide 1
- The IP Endpoint Company 2
- Pictorial Alert Icons 3
- Hazard Levels 3
- Important Safety Instructions 4
- Revision Information 5
- Browsers Supported 5
- Contents 6
- Index 77 7
- 011305D / 021108C 8
- Product Overview 9
- Typical System Installation 9
- 1.3 Product Features 10
- 1.4 Supported Protocols 11
- 1.5 Supported SIP Servers 11
- 1.6 Product Specifications 12
- 2.1 Parts List 13
- 2.2 Intercom Components 14
- 2.3 Intercom Setup 16
- Electrical Hazard: 17
- 2.3.3 Wiring the Circuit 18
- Table 2 20
- 2. Connector Functions 20
- Connector Function 20
- Activity 22
- 2.3.6 RTFM Button 23
- 2.3.7 Adjust the Volume 24
- Factory Default Settings 25
- Web Page Item Description 26
- Figure 2-12. Home Page 28
- Web Page Item 29
- Description 29
- Table 2-6. Home Page Overview 29
- CyberData Indoor Intercom 30
- Tabl e 2-7 31
- Configure the SIP Parameters 38
- 2.4.6.3 Delayed DTMF 40
- 2.4.9.1 Assigning Priority 47
- 2.4.12.1 Autoprovisioning 60
- 2.4.12.3 Time Zone Strings 63
- 2.5.1 Uploading the Firmware 66
- Uploading the Firmware 67
- 305100000 68
- 2.6 Command Interface 69
- A.1 Wall Mounting Components 73
- = Cable Slot Open 74
- = Cable Slot Close 74
- A.3 Wall Mounting Option 75
- A.4 Gang Box Option 76
- A.5 Wall Cutout Dimensions 77
- A.6 PCB Dimensions 78
- B.1 Set up a TFTP Server 79
- C.2 Documentation 80
- C.3 Contact Information 81
- C.4 Warranty 82
- C.4.3 Spare in the Air Policy 83
- Numerics 84
Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta CyberData 011305
(45 paginas)Yamaha ELB-02 manuály
Uživatelské manuály a uživatelské příručky pro DVD přehrávače Yamaha ELB-02.
Poskytujeme manuály pdf Yamaha ELB-02 ke stažení zdarma podle typů dokumentů:
Comentarios a estos manuales