CyberData 011035 Especificaciones descargar pdf (Pagina 21)

Installing the VoIP Emergency Intercom

Call Button and the Call Button LED

Operations Guide 930279W CyberData Corporation

2.2.4 Call Button and the Call Button LED

2.2.4.1 Calling with the The Call Button

• You may initiate a call by pressing the Call button.

• An active call is indicated by the Call Button LED blinking at one second intervals.

• The Intercom will automatically answer an incoming call.

• You can press the Call button to terminate an active call whether the call was an incoming call

or a call that was initiated by you.

2.2.4.2 Call Button LED Function

• Upon initial power or reset, the Call Button LED will illuminate.

• When the software has finished initialization, the Call Button LED will blink twice.

• When a call is established (not just ringing), the Call Button LED will blink.

•On the Device Configuration Page, there is an option called Button Lit When Idle. This option

sets the normal state for the indicator light. The Call Button LED will still blink during

initialization and calls.

• The Call Button LED flashes briefly at the beginning of RTFM mode.

Figure 2-5. Call Button and Call Button LED

Call Button and Call Button LED

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 90 91

Sin comentarios

CyberData 011035 Especificaciones Pagina 21