CyberData 011035 Especificaciones descargar pdf (Pagina 26)

Installing the VoIP Emergency Intercom

Announcing the IP Address

Operations Guide 930279W CyberData Corporation

2.2.7 Announcing the IP Address

To announce a device’s current IP address, first determine if you have an Intercom with an RTFM

button (

Figure 2-10), and then do one of the following:

• If you have an Intercom that has an RTFM button, then see Section 2.2.7.1, "Intercom with an

RTFM Button".

• If you have an Intercom that has a jumper and does not have an RTFM button, then see Section

2.2.7.2, "Intercom with a Jumper and No RTFM Button".

2.2.7.1 Intercom with an RTFM Button

1. If you have an Intercom with an RTFM button, then press and hold the RTFM button 

(Figure 2-10) until the IP address is announced.

2. Release the Call Button after the IP address is announced.

Figure 2-10. RTFM button

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 90 91

Sin comentarios

CyberData 011035 Especificaciones Pagina 26