CyberData 010935 Especificaciones descargar pdf (Pagina 26)

Installing the VoIP Intercom

Intercom Setup

Operations Guide 930242AB CyberData Corporation

2.1.7 Announcing the IP Address

To announce a device’s current IP address, first determine if you have an Intercom with an RTFM

button (see SW1 in

Figure 2-10), and then do one of the following:

• If you have an Intercom that has an RTFM button, then see Section 2.1.7.1, "Intercom with an

RTFM Button".

• If you have an Intercom that has a jumper and does not have an RTFM button, then see Section

2.1.7.2, "Intercom with a Jumper and No RTFM Button".

2.1.7.1 Intercom with an RTFM Button

1. If you have an Intercom with an RTFM button, then press and hold the RTFM button (see SW1

Figure 2-10) until the IP address is announced.

2. Release the Call Button after the IP address is announced.

Figure 2-10. RTFM Button (SW1 Button)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 92 93

Sin comentarios

CyberData 010935 Especificaciones Pagina 26