CyberData 011186 Manual de usuario descargar pdf (Pagina 35)

Operations Guide 930796L CyberData Corporation

Installing the VoIP Outdoor Intercom

Intercom Setup

2. On the Device page, you may enter values for the parameters indicated in Tabl e 2-7.

Note The question mark icon (

) in the following table shows which web page items will be defined

after the To

ggle Help button is pressed.

Table 2-7. Device Configuration Parameters

Web Page Item Description

Volume Settings (0-9)

SIP Volume Set the speaker volume for a SIP call. A value of 0 will

mute the speaker during SIP calls.

Multicast Volume

Set the speaker volume for multicast audio streams. A

value of 0 will mute the speaker during multicasts.

Ring Volume

Set the ring volume for incoming calls. A value of 0 will

mute the speaker instead of playing the ring tone when

Auto-Answer Incoming Calls is disabled.

Sensor Volume

Set the speaker volume for playing sensor activated audio.

A value of 0 will mute the speaker during sensor activated

audio.

Microphone Gain

Set the microphone gain level.

Volume Boost:

No Volume Boost

Volume Boost 1

Volume Boost 2

Volume Boost 3

Set the Boost level to increase the volume output of the

speaker. Using Volume Boost may introduce audio clips or

cause the device to drop from full duplex to half duplex

operation.

Normal operation of the product can be met with volume

vels 0 through 9. 0 being mute and 9 being the loudest

volume that in a normal arm's length and average

background noise, will enable full duplex operation and

give the best quality of sound output.

The volume boost options increase the output of the

speak

er by:

3db for Boost level 1

6db for Boost level 2

9db for Boost level 3

If the user would like a higher o

utput from the speaker, the

Boost settings are available. However, operation in Boost

Mode may overdrive or clip the audio if, for example, the

phone that is connected has a high microphone gain or if

the person has a loud voice talking too close to the

microphone.

The acoustic echo canceller also has a harder time

main

taining full duplex operation when in the Boost

Mode. The product may drop from full duplex operation

into half/duplex mode while in Boost Mode.

Contact CyberData support for additional information if

needed.

Relay Settings

Activate Relay with DTMF Code Activates the relay when the DTMF Activation Code is

entered on the phone during a SIP call with the device.

RFC2833 DTMF payload types are supported.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 115 116

Comentarios a estos manuales

Sin comentarios

CyberData 011186 Manual de usuario Pagina 35

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta CyberData 011186