CyberData 011186 Manual de usuario descargar pdf (Pagina 90)

Operations Guide 930796L CyberData Corporation

Installing the VoIP Outdoor Intercom

Intercom Setup

83

2.6 Command Interface

Some functions on the device can be activated using simple POST commands to the web interface.

The examples in

Tabl e 2-25 use the free unix utility, wget commands. However, any program that

can send HTTP POST commands to the device should work.

2.6.1 Command Interface Post Commands

Note These commands require an authenticated session (a valid username and password to

work).

Table 2-25. Command Interface Post Commands

Device Action HTTP Post Command

a

Trigger relay (for configured delay) wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

command.cgi" --post-data "test_relay=yes"

Place call to extension (example: extension 130) wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

command.cgi" --post-data "call=130"

Place point-to-point call

b



(example: IP phone address = 10.0.3.72)

wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

command.cgi" --post-data "call=10.0.3.72"

Terminate active call wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

command.cgi" --post-data "terminate=yes"

Force reboot wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

command.cgi" --post-data "reboot=yes"

Test Audio button

wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

command.cgi" --post-data "test_audio=yes"

Announce IP address wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

command.cgi" --post-data "speak_ip_address=yes"

Play the "0" audio file wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

audioconfig.cgi" --post-data "play_0=yes"

Play the "1" audio file wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

audioconfig.cgi" --post-data "play_1=yes"

Play the "2" audio file wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

audioconfig.cgi" --post-data "play_2=yes"

Play the "3" audio file wget --user admin --password admin --auth-no-challenge --no-

check-certificate --quiet -O /dev/null "https://10.0.3.71/cgi-bin/

audioconfig.cgi" --post-data "play_3=yes"

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 115 116

Comentarios a estos manuales

Sin comentarios