CyberData 011186 Manual de usuario descargar pdf (Pagina 48)

Operations Guide 930796L CyberData Corporation

Installing the VoIP Outdoor Intercom

Intercom Setup

SIP Server Enter the SIP server address as an IPv4 address in dotted decimal

notation or a fully qualified domain name. This parameter also becomes

the host portion of the SIP-URI for the device's Nightringer extension on

the SIP server. This field can accept entries of up to 255 characters in

length.

Remote SIP Port The Remote SIP Port is the port number the device will use as the

destination port when sending SIP messages for the Nightringer

extension. The default Remote SIP Port is 5060. The supported range is

0-65536. Enter up to 5 digits.

Local SIP Port The Local SIP Port is the port number the device will use to receive SIP

messages for the Nightringer extension. This value cannot be the same as

the Local SIP Port for the primary extension. The default Local SIP Port is

5061. The supported range is 0-65536. Enter up to 5 digits.

Outbound Proxy Enter the Outbound Proxy address as an IPv4 address in dotted decimal

notation or a fully qualified domain name (FQDN). When an IP address is

configured, the device will send all SIP messages to this IP address for the

Nightringer extension. When an FQDN is configured, the device will run

DNS NAPTR, SRV, and A queries on the FQDN to resolve an IP address

to which it will send all SIP messages for the Nightringer extension. This

field can accept entries of up to 255 characters in length.

Outbound Proxy Port The Outbound Proxy Port is port number used as the destination port

when sending SIP messages to the outbound proxy for the Nightringer

extension. A value of 0 will default to 5060. The supported range is 0-

65536. Enter up to 5 digits.

User ID Specify the SIP User ID for the SIP server. This parameter becomes the

user portion of the SIP-URI for the device's Nightringer extension. Enter

up to 64 alphanumeric characters.

Authenticate ID Specify the Authenticate ID for the SIP Server. This parameter is required

for SIP registration authentication. Enter up to 64 alphanumeric

characters.

Authenticate Password Specify the Authenticate Password for the SIP Server. This parameter is

required for SIP registration authentication. Enter up to 64 alphanumeric

characters.

Re-registration Interval (in seconds) The SIP Re-registration Interval (in seconds) is the SIP Registration lease

time, also known as the expiry. The supported range is 30-3600 seconds.

Enter up to 4 digits.

Dial Out Settings

Dial Out Extension Specify the extension the device will call when someone presses the Call

button. Enter up to 64 alphanumeric characters.

Note: For information about dial-out extension strings and DTMF tones,

see Section 2.4.7.1, "Dial Out Extension Strings and DTMF Tones (using

rfc2833)".

Extension ID A Caller identification string added to outbound calls. Enter up to 64

alphanumeric characters.

Call Disconnection

Terminate Call After Delay Automatically terminate an active call after a given delay in seconds. A

value of 0 will disable this function. Enter up to 8 digits.

Table 2-13. SIP Configuration Parameters (continued)

Web Page Item Description

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 115 116

Comentarios a estos manuales

Sin comentarios

CyberData 011186 Manual de usuario Pagina 48

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta CyberData 011186